10 bbl brewing system

HOME Forums Community Forum 10 bbl brewing system

This topic contains 0 replies, has 1 voice, and was last updated by  jingying 2 weeks, 1 day ago.

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #474

    jingying
    Moderator

    10 bbl brewing system

     

    1. Basic product information:

     

    Capacity: 10bbl

    Two Vessels: mash tun/lauter tun/ kettle &whirlpool tun

    Heating method: by steam, by electricity, by fire.

     

    2.Product configuration:

     

    Milling system- Mash system- Fermentation system- Cooling system- Control system with PLC- Filter system-Filling system

     

    2.1Milling system:

    2.1.1Malt crusher, Double -roller type, carbon steel

    2.2Mashing system

    2.2.1 Mash tun: SUS304, inner shell thickness: 3mm or more thick,Cladding thickness: 2mm, Jacket material is miller which withstand voltage is 3bar, 80mm rock wool or polyurethane foam used to keep warm, top with horizontal reducer, equipped with cleaning tube, washing ball confirm with ISO standard, temperature sensor, circular glass manhole, light, sight glass, legs

    2.2.2Lauter tun: inner shell thickness: 3mm,cladding thickness:2mm, 80mm rock wool or polyurethane foam used to keep warm, side feeding when lauter, cone shape tank bottom, outlet pipe with sight glass and sample valve, lauter plate: milling, tillage device: material SUS304 , top with horizontal reducer, equipped with cleaning tube, washing ball confirm with ISO standard, temperature sensor, circular glass manhole, light, sight glass, legs.

    2.2.3Kettle & whirlpool tun: SUS304,cone shape, inner shell thickness: 3mm,cladding thickness:2mm, miller jacket, withstand voltage 3bar. thickness: 1.5mm, 80mm rock wool or polyurethane foam used to keep warm, counterclockwise tangential feeding, with liquid level tube, spiracle, manhole. Equipped with cleaning tube, washing ball confirm with ISO standard, temperature sensor, circular glass manhole, light, sight glass, legs.

    2.2.4Wort pump: SUS304, national sanitary level, famous brand, frequency conversion control, pipe fitting material is SUS304.

    2.2.5Lauter pump: SUS304, national sanitary level, famous brand, frequency conversion control, pipe fitting material is SUS304.

    2.2.6Plate heat exchanger: two-cold type, hanging,design pressure:1.0mpa,

    temperature: 150℃,

    2.2.7Wort oxygenator: Venturi principle, SUS304 material, oxygen filling uniform meticulous, with glass lens, oxygen is visible.

    2.2.8Yeast adding tank: Portable, transfer yeast into the board in wort after line by

    gas,high-quality stainless steel SUS304 material. Tanks with endoscopic, Upper open for manual cleaning and with the exhaust valve; The lower is cone bottom; Outlet equips with activity transparent hose, a tube for dual-use, outlet and inlet yeast tube.

    2.2.9 Platform and foot step: SUS304

    2.2.10  Mash line: SUS 304, including all mash system valves and piping.

    2.3Fermentation system

    2.3.1Fermentation tank: SUS304,inner shell thickness: 3mm,Cladding thickness: 2mm,dribbling is used to cool, thickness: 1.5mm,80mm polyurethane foam used to keep warm, withstand voltage of tank is 2.5bar, 60 °hypocone is compressive strength design, empty capacity20%,internal roughness 0.4 um or less, no distortion, no scratches, weld highly polished, the upper with lamp lens, with temperature sensors, sampling valve, pressure gauge discharge pipe diameter is Ø38, negative pressure valve,SUS304, opening pressure 0.2 MPa.

    2.3.2Mechanical valve: Material is SUS304, mechanical pressure regulating, control the pressure in the fermentation tank.

    2.3.2CIP system: Installed with two 100l washing tank and one cleaning pump, with control panel, cleaning pump flow meter is 2T/H,lift more than 20 meters, corrosion resistance.

    2.4Cooling system

    2.4.1Refrigerator: ZB58KQ\8HP,valley wheel compressor, matching plate evaporator.

    2.4.2Alcohol water tank: SUS304, inner shell thickness: 2mm, cladding thickness: 1.5mm, polyurethane foam used to keep warm, inner equip with copper evaporator, heat radiating area matches evaporator, automatic temperature control.

    2.4.3Alcohol water pump: alcohol water circulating pump, ability to meet the requirements.

    2.4.4Alcohol water line: SUS 304, Including all alcohol water line valves and piping.

    2.5Control system with PLC

    2.5.1 Control system with PLC: Realize special fermentation that is two warming segments, three sections of cooling. According to different beer can set different fermentation curve, to meet different fermentation technology. Achieve 2-24 hours any cooling speed setting thereby preventing ice tank and protect the function of the yeast, and meet the normal fermentation mechanism. No duty for fermentation inspection. Temperature, time and cycle can be arbitrarily set and modified. System capacity meets a fermentation period. System collect data and summary every 20 minutes, record all data of a fermentation cycle. Traceability. The accuracy of error is plus or minus 0.3 ℃.

    2.5.2 Switchboard:Mash &fermentation &refrigeration shared one

    2.5.3 Fermentation control solenoid valve:Stainless steel spring, fluorine rubber diaphragm, DC24V.

    2.5.4 Wire and Cable: Signal lines use the shielded wire

    2.5.5 Threading pipe: Stainless steel decoration pipe

    2.5.6 Movable frame: Stainless steel

     

    3.Filter system up to the customer requirement.

     

    4.Filling system up to the customer requirement.

     

    5.Flow chart
    WEMAC is professional beer equipment manufacturer since 1958.  http://bestbeerbrewingequipment.com/BBL_brewing_system/10_bbl_brewing_system_57.html

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.